Free written estimateMoisture readings before we quoteMon–Sat 185 New Jersey towns →
VGJ Floors Covering (732) 607-4327
  1. Home
  2. Service area
  3. Brick
  4. Hardwood Floor Refinishing

Hardwood Floor Refinishing in Brick, NJ

Hardwood Floor Refinishing for homes in Brick, Ocean County.

  • 1976 median year built
  • 54.5% built before 1978
  • 33,331 housing units
  • Ocean County
Refinished dark oak floor in a New Jersey home, late afternoon light drawing across the boards

The median Brick home dates to 1976, and about 54.5% of the housing stock predates 1978 — which shapes what is under the finish and how the work has to be done.

What Brick floors are usually made of

The median Brick home dates to 1976, which puts most of the housing stock in the postwar era — typically 2¼-inch red oak strip over a wood subfloor, the most straightforward floor to refinish.

This is the case wood flooring work is built around. Red oak strip nailed over plywood or plank subfloor has adequate wear layer, takes stain evenly and responds predictably to sanding.

It is also the housing most likely to be on its first or second refinish, which usually means there is wood left to work with. In Brick, 54.5% of homes predate 1978, so the age of the finish system is often the limiting factor rather than the age of the wood.

How Brick compares

Housing here tracks the Ocean County median of 1976 closely.

At 54.5% pre-1978, Brick sits in the newer half of the 185 towns we serve. Neighbouring Bay Head is a different picture — median 1958 against 1976 here — which is why we quote by address rather than by area. Brick is about 16 miles from our base in Eatontown.

Housing data for Brick

These are the Census figures behind everything above — published so you can check them rather than take our word for it.

Median year built1976
Built before 1978 (approx.)54.5%
Built before 19402.9%
Housing units33,331
Population74,807
CountyOcean County

Source: US Census Bureau, ACS 2023 5-Year Estimates. The pre-1978 share is an approximation — see how it is derived.

Lead-safe requirements in Brick

Roughly 54.5% of Brick homes predate 1978, so whether the EPA lead-safe rule applies depends on the specific address rather than on the town.

In a town with mixed housing age this is a per-house question. Your municipal tax record lists the year built, and that is the number that decides it.

Where it applies, it applies to work disturbing painted surfaces — the trim and stair components at the edges of the floor, not the bare field.

Hardwood Floor Refinishing, in short

Refinishing sands a wood floor back to bare wood and rebuilds the finish on top of it. It removes scratches, gray areas and old stain colour, and it is the only process that resets a floor's appearance completely. It also consumes wear layer, which is why the first question on any refinishing job is how much wood is left.

The full technical detail — method, materials and what decides the outcome — is on our hardwood floor refinishing page.

How to check a flooring contractor in Brick

Ask for the New Jersey home improvement contractor registration number, which begins with the prefix 13VH, and verify it free on the state's public lookup before you sign anything. The status has to read Active: registration expires every 31 March.

New Jersey has no flooring-specific trade licence. HIC registration is the requirement, and state rules put that number on contracts, estimates and advertisements, which makes it checkable before money changes hands.

Beyond registration, the things that actually distinguish crews are checkable too: moisture readings taken before the quote rather than after, a stated grit sequence, and named finish products you can look up a data sheet for.

  • 13VH registration number, verified current on the state lookup
  • Moisture readings taken and put in writing before quoting
  • A stated grit sequence, not just "we sand it"
  • Named finish products with published technical data sheets
  • EPA Lead-Safe certification if the house predates 1978
  • Proof of insurance, with coverage amounts stated

Hardwood Floor Refinishing in towns near Brick

We work Brick and the surrounding Ocean County area. These are the nearest towns we also cover.

Frequently asked questions

Do you serve Brick, NJ?

Yes. Brick is one of the 185 New Jersey municipalities we cover, across nine counties.

How old are most homes in Brick?

The median Brick home was built in 1976, and about 54.5% of the housing stock predates 1978. Figures are from the US Census ACS 2023 5-year estimates.

Does the EPA lead-safe rule apply to my Brick home?

About 54.5% of Brick homes predate 1978, so it depends on the specific address. Check the year built on your municipal tax record.

Do I need a permit for hardwood floor refinishing in Brick?

Floor refinishing and like-for-like replacement generally do not require a permit in New Jersey. Structural work, subfloor replacement or changes to the building do. Confirm with the Brick construction office for your specific scope.

How far in advance should I book?

It varies with season — heating season and the weeks before holidays are the busiest. Contact us with your timeframe and we will tell you honestly what is available.

What does hardwood floor refinishing cost in Brick?

We do not publish a per-square-foot figure, because the honest number depends on the floor: square footage is only the starting point, and edge work, stairs, closets, coat count, stain and lead-safe requirements all move it. We quote in writing after seeing the floor and taking moisture readings.

Get your Brick floor quoted properly

We take moisture readings and check wear layer before putting a number on the job, so the quote reflects what your floor can actually support — not a rate per square foot applied blind.

Request a free estimate
Call (732) 607-4327