Free written estimateMoisture readings before we quoteMon–Sat 185 New Jersey towns →
VGJ Floors Covering (732) 607-4327
  1. Home
  2. Service area
  3. Millburn

Wood Flooring in Millburn, NJ

Wood floor refinishing, installation and repair in Millburn, Essex County.

  • 1953 median year built
  • 86.5% built before 1978
  • 7,276 housing units
  • Essex County
Refinished dark oak floor in a New Jersey home, late afternoon light drawing across the boards

The median home here dates to 1953 and about 86.5% of the housing predates 1978 — the two facts that shape most flooring work in this town.

What Millburn floors are usually made of

With a median build year of 1953 and 34.3% of homes predating 1940, Millburn has a genuinely mixed housing stock — which means the floor has to be identified before the work is scoped.

A mixed-era town is the hardest one to generalise about. Two houses on the same street in Millburn can have completely different floors under the finish: original narrow board in one, postwar red oak strip in the other.

We do not assume. Wear layer, board width and species get checked on site, because the answer changes the method and the price.

Services we provide in Millburn

Every service below is the same crew and the same method used across Essex County — the page for each one says what it involves in Millburn specifically.

How Millburn compares

Housing here tracks the Essex County median of 1956 closely.

At 86.5% pre-1978, Millburn has the 8th oldest housing stock among the 185 towns we serve. Neighbouring Maplewood is a different picture — median 1938 against 1953 here — which is why we quote by address rather than by area. Millburn is about 34 miles from our base in Eatontown.

Housing data for Millburn

These are the Census figures behind everything above — published so you can check them rather than take our word for it.

Median year built1953
Built before 1978 (approx.)86.5%
Built before 194034.3%
Housing units7,276
Population21,793
CountyEssex County

Source: US Census Bureau, ACS 2023 5-Year Estimates. See the full dataset.

Lead-safe requirements in Millburn

About 86.5% of Millburn homes were built before 1978, so work that disturbs painted baseboards, shoe molding or stair components will usually fall under the EPA's lead-safe rule.

This is the normal condition of a Millburn job, not an exception to plan around. The exposure is at the edges of the floor — sanding equipment runs directly against painted trim.

Dust containment and lead-safe practice are different things. A containment system manages nuisance dust; the RRP rule addresses a regulated hazard and carries its own containment, cleaning and verification requirements. Ask about both, separately.

The pre-1978 figure is approximate — see the method note on our housing data page for how it is derived.

Towns near Millburn

Frequently asked questions

Do you serve Millburn, NJ?

Yes. Millburn is one of the 185 New Jersey municipalities we cover, across nine counties.

How old are most homes in Millburn?

The median Millburn home was built in 1953, and about 86.5% of the housing stock predates 1978. Figures are from the US Census ACS 2023 5-year estimates.

Does the EPA lead-safe rule apply to my Millburn home?

With roughly 86.5% of Millburn housing built before 1978, it applies to most addresses here. Your municipal tax record lists your year built, which is what decides it.

Do I need a permit for wood flooring in Millburn?

Floor refinishing and like-for-like replacement generally do not require a permit in New Jersey. Structural work, subfloor replacement or changes to the building do. Confirm with the Millburn construction office for your specific scope.

How far in advance should I book?

It varies with season — heating season and the weeks before holidays are the busiest. Contact us with your timeframe and we will tell you honestly what is available.

What does wood flooring cost in Millburn?

We do not publish a per-square-foot figure, because the honest number depends on the floor: square footage is only the starting point, and edge work, stairs, closets, coat count, stain and lead-safe requirements all move it. We quote in writing after seeing the floor and taking moisture readings.

Get your Millburn floor quoted properly

We take moisture readings and check wear layer before putting a number on the job, so the quote reflects what your floor can actually support — not a rate per square foot applied blind.

Request a free estimate
Call (732) 607-4327